Tile Adhesive
Home / Tile Adhesive
Product Specification
| COLOR | GREY |
| Packaging Size | 20 Kg ( Standard | Premium | Elite ) |
| STORAGE CONDITIONS / SHELF-LIFE | 12 months from date of production if stored properly in original unopened, sealed and undamaged packaging in cool and dry conditions at temperatures between +5°C and +35°C. Protect from direct sunlight. Protect from humidity. |
Application Instructions:
MIXING
Place 2/3 of water quantity into the recipient bulk, add the tile adhesive
powder slowly to the water while mixing; the usage of a mechanical mixer with
low rotation speed is recommended. Add the remaining 1/3 water and mix
until reaching a homogeneous mortar lumps free.
Keep the paste rest for 2 to 3 min prior application.
The exact water needed should be determined based on trials.
PRODUCT APPLICATION
Apply Tile Adhesive on the substrate using a notched trowel in order to achieve
a minimum uniform thickness of 2mm. Press firmly the tile into the substrate
for certain seconds to ensure good contact with the adhesive. For better and
full adhesion, apply Tile Adhesive on both: back of the tile and substrate.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use.
Hardened / cured material can only be removed mechanically.
Product Information:
Tile Adhesive is a single component, pre-packed tiling adhesive mortar
combining cement with selected grades of sand and several admixtures. Tile
Adhesive has good bonding and consistency in different climate, and can be
used for adhering different kind of tiles. Only requires addition of water.
Uses
Tile Adhesive provides the following properties:
▪ Factory mixed – Consistent quality
▪ Better workability. Save 25-50% of time
▪ Better coverage: 60sq.ft per 20 Kg (based on 3 mm
mortar thickness)
▪ Tiles can be adjusted up to 30minutes after application
▪ Fixing wide range of tiles
▪ Good bond adhesion
Benifits:
1]Chemical Bond
2]Easy and Fast to apply
3]Once coated, there remains no concern
4]Can be applied on any surfaces, rough
concrete, honey comb concrete, smooth
concrete, higher grade of concretes etc.
5]No health hazards involved
6]Slightly expensive – Rs. 3 to3.5 per sq.ft.
7] Ready to apply, not to be mixed or diluted
8]To be applied as a Single Coat
9]Apply with help of a brush (used for painting) bristles width 4 or 6 Inches.
10]Simple paint application